Convert Gulh Yamaha R6 Injection

Discuss Technical things here, gearing, tires, motors, chassis, ect.


Convert Gulh Yamaha R6 Injection

Postby blaney11 » Sun Jun 13, 2010 3:23 pm

What do I have to do to convert a 07 yamaha r6 gas daul rail Guhl injection to alcohol beside a pressure regulator and 8 injectors???

Don
blaney11
Rookie
Rookie
 
Posts: 36
Joined: Mon May 17, 2010 7:07 pm
Reputation point: 0

Re: Convert Gulh Yamaha R6 Injection

Postby gwm » Sun Jun 13, 2010 4:49 pm

You will need a new map in your power commander. Most important is to have it dynoed. Just putting any map in will not give max power or tourqe. You will also need to know what to set the fuel pressure at. Good luck.
Miller Dyno
gwm
Rookie
Rookie
 
Posts: 30
Joined: Sun Aug 26, 2007 10:25 pm
Reputation point: 0

Re: Convert Gulh Yamaha R6 Injection

Postby blaney11 » Sun Jun 13, 2010 5:38 pm

Yeah I knew I needed a power commander but what do I use for fuel injectors is my question
blaney11
Rookie
Rookie
 
Posts: 36
Joined: Mon May 17, 2010 7:07 pm
Reputation point: 0

Re: Convert Gulh Yamaha R6 Injection

Postby Guhl Motors » Sun Jun 13, 2010 7:50 pm

A gas conversion is not much more than an airbox and upper fuel rail, which reuses the stock fuel injectors. The throttle bodies remain totally stock with stock fuel rail.
The upper fuel rail is different than the one we use for the methanol conversion (smaller holes for the stock gas injector), so you will need both fuel rails, mounts, fittings, 8 fuel injectors, and 8 injector connectors.

Give us a call at the shop for any pricing or additional information.

Thanks,
Don Guhl
Guhl Motors
717-618-4212
www.guhlmotors.com
Don Guhl
Guhl Motors
http://www.guhlmotors.com
717-618-4212

CHECK OUT OUR WEBSITE FOR INFORMATION ON OUR GROUNDBREAKING RELEASE OF THE GUTS SYSTEM!!!
User avatar
Guhl Motors
Feature Winner
Feature Winner
 
Posts: 118
Joined: Thu Jun 29, 2006 1:37 am
Location: Lititz, PA
Reputation point: 21

Re: Convert Gulh Yamaha R6 Injection

Postby blaney11 » Sun Jun 13, 2010 8:45 pm

would you sell me the parts I need and instructions on how it goes together? I got a local guy who thinks he could put it together. Need to save money , we are just lucky to race !
blaney11
Rookie
Rookie
 
Posts: 36
Joined: Mon May 17, 2010 7:07 pm
Reputation point: 0


Return to Technical Q&A

Who is online

Users browsing this forum: Bill, Bing [Bot], SWR and 9 guests