2005 yamaha r6 pushing oil out breather

Discuss Technical things here, gearing, tires, motors, chassis, ect.


2005 yamaha r6 pushing oil out breather

Postby edmcki » Sun Jun 26, 2016 10:27 pm

2005 yamaha r6 stated pushing oil out the crank case breather after putting lower gear on any ideas?
edmcki
Newbie
Newbie
 
Posts: 9
Joined: Wed Feb 19, 2014 11:33 am

Re: 2005 yamaha r6 pushing oil out breather

Postby Bill » Mon Jun 27, 2016 7:07 am

They tend to push out oil if there is too much in the crank case. I run a long breather tube, up as high as I can, to the bottom of the hood, then out the bottom. Makes it harder for the oil to get out.

Bill
User avatar
Bill
Premium Member
Premium Member
 
Posts: 899
Joined: Tue Oct 18, 2005 9:34 am
Location: Bellevue, MI

Re: 2005 yamaha r6 pushing oil out breather

Postby edmcki » Mon Jun 27, 2016 1:26 pm

Thanks I will try that . Do you have a breather in the valve cover?
edmcki
Newbie
Newbie
 
Posts: 9
Joined: Wed Feb 19, 2014 11:33 am

Re: 2005 yamaha r6 pushing oil out breather

Postby Phil Meisner Jr. » Tue Jun 28, 2016 12:43 pm

Vent the valve cover and run a -6 pushlock line from the crankcase along the horizontal hip bar and up to the LR "A" at the back the car to a Jaz breather tank like this one...
http://www.jazproducts.com/store/1-pint-mini-breather
Phil Meisner Jr.
Wannabe
Wannabe
 
Posts: 12
Joined: Mon Mar 03, 2008 12:03 am

Re: 2005 yamaha r6 pushing oil out breather

Postby BikerTrash » Tue Jun 28, 2016 2:48 pm

Ed, Put a K&N Breather in the Valve cover like both my cars have , also run the crankcase hose up and turn it down at the chassis bar right behind the engine ....Been doing this with my Yamerhammers for 3 years now with no issues at all .
Combs Racing #37T & 37J
2015 NW Track Champion ,Coles County
Runaway Chassis ,Arcola Il
BikerTrash
Wannabe
Wannabe
 
Posts: 19
Joined: Fri Nov 14, 2014 8:40 am

Re: 2005 yamaha r6 pushing oil out breather

Postby Bill » Tue Jun 28, 2016 4:42 pm

I run a vent tube from the valve cover to the back of the motor, and tee it into the crankcase tube. The valve covers have been modified to be an actual vent.

Here's the Tee:

Image

Here's the loop which is normally stuffed under the hood. You can see the tee down at the bottom in the distance.

Image

Bill
User avatar
Bill
Premium Member
Premium Member
 
Posts: 899
Joined: Tue Oct 18, 2005 9:34 am
Location: Bellevue, MI

Re: 2005 yamaha r6 pushing oil out breather

Postby Milforthe » Wed Sep 02, 2020 7:46 am

Why don’t you go to the mechanic who can help ou with this and can answer to your problem. But If you wanna do it by yourself than assignmentgeek.com.au/assignment-help/perth/ visit here they can help you just contact with them.
Milforthe
Newbie
Newbie
 
Posts: 1
Joined: Wed Sep 02, 2020 7:44 am

Tripod Turnstile

Postby cindisedtall » Thu Sep 03, 2020 3:59 am

Tripod Turnstile is generally used in simple dissuasion level access control of public passages. It is widely used in work attendance checking systems of factories, consumption systems of public institutions, access control of residential estates, ticket exit systems of scenic, sports and other arenas, handkey management systems of construction sites and so on.
There are many best security equipment for sale. Please contact us soon at www.jkdcsecurity.com
cindisedtall
Newbie
Newbie
 
Posts: 2
Joined: Thu Sep 03, 2020 2:39 am


Return to Technical Q&A

Who is online

Users browsing this forum: No registered users and 48 guests